Electronic components and circuits are very sensitive to electrostatic discharge. Although our
company designs anti-static protection for the main interfaces on the card when designing circuit
board products, it is difficult to achieve anti-static safety protection for all components and circuits. Therefore, it is recommended to observe anti-static safety precautions when handling any circuit
board component (including RTSO-6001B). Anti-static safety protection measures include, but are
not limited to the following:
a) The smart box should be placed in an anti-static bag during transportation and storage, and then
the board should not be taken out during installation and deployment.
b) Before touching the smart box, discharge the static electricity stored in the body: wear a
discharge grounding wrist strap.
c) Operate the smart box only within the safe area of the electrostatic discharge point.
d) Avoid moving smart boxes in carpeted areas
|Support Jetson||Jetson Nano|
1x USB Type A , support usb2.0 and usb3.0 signal, 1A max output current
1x USB Type A , support usb2.0 signal only, 1A max output current
1x Micro USB, support usb host mode and usb device mode , 1A max output current
|Ethernet||1x Gigabit Ethernet|
|Battery interface||1x RTC battery interface|
|HDMI||1x Mini- HDMI 2.0 (6Gbps，24bpp，4096x2160@60Hz)|
1x MIPI interface