Eagle 101 Fanless systems have been designed by Tanna TechBiz to cool the internal components with no passive air flow through the chassis. By removing all vent holes for passive airflow, we have significantly reduced the ability for dust and other airborne particulates to enter the chassis. This protection of the interior components brings you peace of mind knowing that the chance of failure due to particulate ingress is really very low.
Get started fast with the comprehensive JetPack SDK with accelerated libraries for deep learning, computer vision, graphics, multimedia, and more. Jetson Nano has the performance and capabilities you need to run modern AI workloads, giving you a fast and easy way to add advanced AI to your next product.Jetson Nano is a small, powerful computer for embedded applications and AI IoT that delivers the power of modern AI.
The EAGLE -101 carrier board has been developed by Tanna TechBiz and is a make in India initiative. This board has been designed for the NVIDIA® Jetson NanoTM Module.
The entire system constituting of the carrier board and module can be used for a wide array of use cases ranging from computer vision, robotics, factory automation, Traffic management solutions (ITMS), Smart Cities and so on.
The board features rich I/O ports that includes 4 USB 3.0, 1 GB Ethernet, Micro SD card slot etc.., wide range of temperature specification and at the same time, packaged together in a compact size.
|Model||Tanna TechBiz Eagle 101 - Fan Less Embedded AI System for NVIDIA Jetson Nano Module|
|Support||Fully support NVIDIA® Jetson Nano™ Module|
|MIPI Camera Inputs||
2x 2 lane MIPI CSI-2, 15 pin FPC 1mm Pitch Connector (Compatible on NVIDIA® Jetson Nano™ Developer Kit)
1x 4 lane MIPI CSI-2, 36 pin FPC 0.5mm Pitch Connector
|USB||1x USB 2.0 Micro-B for recovery 4x USB 3.0 Type-A|
|Storage||1x micro-SD card slot|
|Expansion Header||40 pins: 2x I2C, 1x UART, 9x GPIOs|
|Input Power||DC Male Pin; 5V-4A is recommended|
|Button Header||1x6 Buttons Power,FC REC,SYS RST,AUTO ON,UART TX0,UART RX0,LED|
|WLAN||1xM.2 Key E|
|FAN Header||1xFan Header|
|Output||1xHDMI and 1xDP Header|
|PCB/Electronics Mechanical Info||
W: 100mm x L: 79.2mm x H: 26.5mm (3.43” x 2.78” x 1.07”) - Weight: 78g
|Certifications||CE, FCC, RoHS|
|Full Product Mechanical Info||
L-150.5mm x W-95mm x H-60mm - Wall Mount Kit