The EAGLE -101 carrier board has been developed by Tanna TechBiz and is a make in India initiative. This board has been designed for the NVIDIA® Jetson NanoTM Module.
The entire system constituting of the carrier board and module can be used for a wide array of use cases ranging from computer vision, robotics, factory automation, Traffic management solutions (ITMS), Smart Cities and so on.
The board features rich I/O ports that includes 4 USB 3.0, 1 GB Ethernet, Micro SD card slot etc.., wide range of temperature specification and at the same time, packaged together in a compact size
Model | Tanna TechBiz EAGLE-101 |
---|---|
Type | Carrier Board |
NVIDIA GPU SoC Module Compatbility | NVIDIA® Jetson Nano™Module |
Temperature | Operating temperature 0°C~65°C |
MIPI Camera Inputs | 2x 2 lane MIPI CSI-2, 15 pin FPC 1mm Pitch Connector (Compatible on NVIDIA® Jetson Nano™ Developer Kit) 1x 4 lane MIPI CSI-2, 36 pin FPC 0.5mm Pitch Connector |
USB | 1x USB 2.0 Micro-B for recovery 4x USB 3.0 Type-A |
Storage | 1x micro-SD card slot |
Expansion Header | 40 pins: 2x I2C, 1x UART, 9x GPIOs |
Input Power | DC Male Pin; 5V-4A is recommended. |
Button Header | 1x6 Buttons Power,FC REC,SYS RST,AUTO ON,UART TX0,UART RX0,LED |
WLAN | 1xM.2 Key E |
FAN Header | 1xFan Header |
Output | 1xHDMI and 1xDP Header |
PCB/Electronics Mechanical Info | W: 100mm x L: 79.2mm x H: 26.5mm (3.43” x 2.78” x 1.07”) Weight: 78g |
Certifications | CE, FCC, RoHS |