OpenWrt One/AP-24.XY” router board based on MediaTek MT7981B (Filogic 820) SoC and MediaTek MT7976C dual-band WiFi 6 chipset.
OpenWrt official board and support
MediaTek MT7981B (Filogic 820) SoC
Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3/2×2 + zero-wait DFS 5Ghz)
1GB DDR4
1 x 2.5GbE RJ45 port and |1 x Gigabit Ethernet RJ45 port
256 MB SPI NAND and 16 MB SPI NOR flash are used to make the board almost unbrickable
M.2 2242/2230 socket for NVMe SSD (PCIe gen 2 x1)
RTC support
PoE support
MikroBUS socket for expansion modules
HardWare Specification of OpenWrt One | |
---|---|
SoC | MediaTek MT7981B (Filogic 820) dual-core Cortex-A53 processor @ 1.3 GHz |
System Memory | 1GB DDR4 |
Storage | 256 MB SPI NAND flash for U-boot and Linux |
16 MB SPI NOR flash for write-protected (by default) recovery bootloader (reflashing can be enabled with a jumper) | |
Two types of flash devices are used to make the board almost unbrickable | |
M.2 2242/2230 socket for NVMe SSD (PCIe gen 2 x1) | |
Networking | 1 x 2.5GbE RJ45 port |
1 x Gigabit Ethernet RJ45 port | |
Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3/2×2 + zero-wait DFS 5Ghz) | |
3x MMCX antenna connectors | |
USB | 1x USB 2.0 Type-A host port |
USB Type-C (device, console) port using Holtek HT42B534-2 UART to USB chip | |
Expansion | MikroBUS socket for expansion modules |
Debugging | Console via USB-C port or 3-pin header, 10-pin JTAG/SWD header for main SoC |
RTC | support RTC onboard |
Misc | Reset and User buttons |
Boot select switch: NAND (regular) or NOR (recovery) | |
2x PWM LEDs, 2x Ethernet LED (GPIO driven) | |
EM6324 External hardware watchdog | |
NXP PCF8563TS (I2C) RTC with battery backup holder for CR1220 coin-cell | |
Power Supply | 15V USB-PD on USB-C port |
Optional 802.3at/af PoE via RT5040 module | |
Dimensions | 148 x 100.5 mm compatible with Banana Pi BPI-R4 case design |
Certifications | FCC/EC/RoHS compliance |