USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi

Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout

Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout

Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade)

SKU
AD-2
Brand Reward Points
0
₹1,069.00
Out of Stock
Categories: Product Brand Adafruit
Topic: Topic

Product Description 

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple.

If you need a thermocouple interface that can handle other types of thermocouples, check out our 'Universal' MAX31856 amplifier board which can be configured in the Arduino sketch to interface with just about any kind of thermocouple

New! Now uses the MAX31855K instead of the MAX6675, so it can measure a wider temperature measurement range. Please note! the MAX31855 is not pin compatible or drop-in code compatible with the MAX6675. We do have an Arduino library for both chips but you'll need to adjust any existing MAX6675 designs for the new MAX31855. The MAX6675 has been discontinued by Maxim.

  • Works with any K type thermocouple
  • Will not work with any other kind of thermocouple other than K type
  • -200°C to +1350°C output in 0.25 degree increments - note that K thermocouples have about ±2°C to ±6°C accuracy
  • Internal temperature reading
  • 3.3 to 5v power supply and logic level compliant!
  • SPI data output requires any 3 digital I/O pins.

 

Technical Specifications

Model Thermocouple Amplifire
Length 20mm/0.8in
Width 20mm/0.8in
Height 3.28mm/0.12in
Weight 1.33g/0.05oz
Write Your Own Review
You're reviewing:Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade)
  1. Thermocouple Amplifire x1