Toggle Nav
Arducam 12MP IMX477 Pan Tilt Zoom(PTZ) Camera for Raspberry Pi 4/3B+/3 and NVIDIA Jetson Nano/NX and NVIDIA Orin NX/AGX Orin, IR-Cut Switchable Camera (B016712MP)
SKU
CAM-ARD-0072
Brand
Reward Points
0
₹10,500.00
In Stock
Categories:
Product Brand Arducam Camera Modules NVIDIA Camera for nVidia Jetson nano Development Board Camera for NVIDIA Jetson Camera for Nvidia Jetson Nano
Topic:
Topic
Product Description
Arducam PTZ camera is a complete solution to turn your Raspberry Pi/Jetson Nano/Xavier NX, and it is capable of remote directional and zoom control, so it could move the camera and the lens, and that means a single camera can be used to monitor places that should be covered by multiple ones.
You can save a lot of cost and time in purchasing and deploying the camera. What’s more, this kit is based on the IR-CUT switchable 12MP Sony IMX477 camera to get sharp images all day and night.
Currently, NVIDIA official has released the NVIDIA Jetson Orin series developer board. Based on it, we have also adapted the camera into NVIDIA Jetson Orin kernel.
Technical Specifications
| Model | B0167 - 12MP |
|---|---|
| Sensor | Sony IMX477 |
| Optical Format | Type 1/2.3(Diagonal 4.60mm) |
| Resolution | 12.3MP |
| Pixel Size | 1.55 µm x 1.55 µm |
| Active Pixels | 4056(H) x 3040(V) |
| Frame Rates | 1080p30, 720p60 and 640 × 480p60/90 |
| Frame Rate on Jetson Nano/Xavier NX | 4032×3040@30fps, 3840×2160@30fps, 1920×1080@60fps |
| Frame Rate (NVIDIA Orin NX/AGX NX) | 4032×3040@60fps, 1920×1080@60fps |
| Shutter Type | Rolling Shutter |
| Focus Type | Front group: focus Back group: Zoom |
| Focal Length | 4.38-10.71mm±5% |
| FOV | 96° – 33° (Horizontal) |
| IR Sensitivity | Optional with additional Motorized IR-Cut filter |
| Camera Board Size | 36mm x 36mm |
| Pan and Tilt Range | 0-180° |
Write Your Own Review
- Arducam PTZ Pan Tilt Zoom Lens, assembled with a 12MP IR-CUT switchable camera board X1
- Controller Board X1
- 15-Pin to 22-Pin Ribbon Cable (11.8 in/30 cm) X1
- 22-Pin Ribbon Cable (11.8 in/30 cm) X1
- XH2.54 Jumper wire with 6-Pin Female Connector (11.8 in/30 cm) X1