The Arducam 13MP MIPI camera module is mainly designed for Raspberry pi boards and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware.
This camera is based on a 1/3 inch Sony IMX135 image sensor which adopts Exmor-R™ technology to achieve high-speed image capturing with high sensitivity and low noise performance. “RGBW coding” color filter is employed and RGB primary color mosaic is reproduced on-chip. High sensitivity, low dark current, and smear-free features are achieved. It equips an electronic shutter with variable integration time.
This MIPI camera module can be used on other ARM, FPGA, DSP, or Nvidia TX1/TX2 hardware platform as well.
1/3 inch Back-illuminated Sony Exmor-R sensor IMX135
Support 13MP/1080p/720p resolution, RAW8/RAW10 output
CSI-2 serial data output (MIPI 2Lane/4Lane selectable)
2-wire I2C communication for sensor register settings
High sensitivity, low dark current, no smear, excellent anti-blooming characteristics
Image compensation processing functions (defect correction, noise reduction)
RGBW coding (R, G, B, and “White”(achromatic)) color filter and RGB primary color mosaic reproduction on chip
Programmable motorized focus lens, FOV 60 degrees
Support all series Raspberry pi boards
|Focus Type||Auto, Fixed|
|IR sensitivity||Visible Light|
|Lens Mount||Stock Lens|
|Shutter Type||Rolling Shutter|